Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized possession from theft. This system is discrete and does not require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This will then allow the start-up of your vehicle.

Simple PIN code change process

Many homeowners are upgrading their security due how to install ghost ii immobiliser immobiliser (https://telegra.ph/10-Essentials-Concerning-Auto-Ghost-Immobiliser-You-Didnt-Learn-At-School-08-25) the increase in vehicle theft. There are many different types of security products that are available for sale that range from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can help you locate your vehicle in the event of it being stolen however it cannot prevent the crime. An immobiliser, on the contrary does exactly what is a ghost immobiliser it says on the tin: it disables the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your vehicle.

Using the existing buttons in your car, the ghost device creates an unique sequence that must be entered before the engine starts. This can be done using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This is especially useful if you need to surrender your car for valet parking or servicing since the immobiliser is active and not deactivated.

The Ghost is a very unique and ingenious device that is used in conjunction with the buttons in your vehicle rather than as a separate unit. This means it's not just a powerful security measure against theft from your vehicle but it can also be transferred to any future vehicles you may have, making it more of an investment than the traditional lock on your steering wheel.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is an advanced security device that shields your pride & joy from key cloning and hacking. It also blocks ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU over the CAN data bus, which disables the engine. It can be installed in the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common method used by car thieves to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can create a sequence that is as long as 20 presses for added security. The iPhone app allows one, authorized connection using a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only run only if a valid PIN is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service or for servicing without the need to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts electronic signals to block your car's system from running its normal initialization process until you enter an individual passcode. The system can be activated or deactivated through your smartphone's app, without the need for extra wires.

The factory-installed immobilisers function with a transponder which is embedded in the key. This sends a message to the ECU. The car will start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. Only by physically towing your vehicle away can thieves take it away, and they would still not be able to drive the vehicle.

ghost immobiliser 2 uses buttons on your vehicle, such as the indicator stalk, the steering wheel, and door panels, to create unique PIN codes which must be entered in order to use your vehicle. This is done without any extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code grabbing technology to determine if the security system has been installed.

Ghost is harder to remove than car alarms, which require disarming with the buttons. This makes it a great supplement to a GPS tracker which helps locate your car after it has been stolen.

Emergency PIN code override

You don't need to go far on social media to find stories or even videos of vehicles that were stolen by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with the original keys.

The bmw m3 ghost installer immobiliser has been designed to combat this and provide you with an extra layer of security to keep your vehicle from being targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN must be entered in conjunction with your original key fob to stop the vehicle from getting started. The unique override PIN is on the black card that you will receive after installation and is easy to remember as there aren't any LEDs.

The device is hidden in the vehicle's wiring and does not emit radio signals. Therefore, it cannot be detected using diagnostic software which can identify what type of security systems you have installed. This makes it a great alternative to an alarm.

Unlike other security systems, which use a relay in engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to block a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be stated prior to the installation of the device. They are also fully service/valet-mode compatible and a good alternative to a tracker when having your car in for repair at the dealers.

Service/Valet Mode

In recent times, there has seen an increase in the number of cars being stolen from owners without keys. It's easier than ever to take your joy and pride thanks to the availability of key cloning tools and door lock picks. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It communicates directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, because it does not utilize radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents you from introducing an ECU or key to circumvent the system, because only the PIN number allows the engine to start.

The device is hidden within your car and is reached via the buttons on your steering wheel, centre console and door panels. Before you can start your car, you must enter a unique, changeable PIN code up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car being moved away or even started without a PIN code being entered before. If the device is activated and you attempt to drive away, it will display a warning on your dash which will flash continuously for about 300m, if you enter your PIN code during this time, it will deactivate the anti-hijack and your car will continue to drive in the normal way. If you don't enter your PIN code at this point, the warning will keep flashing & will require a new PIN code every attempt to start your vehicle.