Ghost Immobiliser Installation

Guard your precious possessions from car thieves by putting in an immobiliser ghost. Our TASSA verified system protects vehicles from hacking, key cloning, and immobiliser bypassing.

The system is hidden within your vehicles wiring loom making it totally invisible to anyone who sees it. It is operated by creating pin code push sequences that are activated by existing buttons on the steering wheel, door cards, and centre console.

No circuit cuts

It's not surprising that owners want to protect the vehicle they have put so much effort into buying. Traditional security devices, like wheel locks or alarms, are easily manipulated by thieves. A local ghost immobiliser installer immobiliser, on the other hand is a very effective solution that is silent and is not easily detected by modern thieves.

A ghost immobiliser is also known as a hidden device, is a device that connects with your vehicle's data network CAN to disable the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle via buttons on the dash, steering wheel and door panels. This creates an individual pincode that is only accessible to you. The code can be altered at any time and can be as long as 20 digits in length, based on the style you prefer. It also includes a secure emergency code you can use should you forget your PIN.

The ghost immobiliser can be used to prevent relay boxes from transferring your car key's signal from inside your home, which could open the doors and begin the vehicle. It can also block sophisticated methods to steal your vehicle, like OBD port hacking. The device is small, weatherproof and hard to spot. It's also hard to hack.

The ghost immobiliser has another benefit: it can be fitted to your vehicle without leaving any permanent marks. This is ideal for those who are planning to resell their car in the near future. It's also much quicker and simpler to install than a factory-fitted system.

The Autowatch Ghost, a revolutionary technology, is a new generation device that prevents thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the existing buttons to generate an unique PIN code. It is a discreet device that can be installed with no wires cut and does not require additional key fobs. It is also connected to the original ECU of the vehicle, preventing thieves using a different key. This system has been verified by TASSA and is able to be linked to an International Security Register. Owners will be able to rest easy knowing that their vehicle is protected from theft.

No scanning with RF

You'll want to safeguard your vehicle from theft when you have spent an enormous amount of money and time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will stop your vehicle from beginning until you enter a unique code. You can generate a 20-digit code using the buttons on your dashboard and the steering wheel. This will ensure that only you are allowed to drive your vehicle. It is also possible to set up a service and valet mode, which allows you to start your car for a short period without entering the PIN code. This will allow your technician to work on your vehicle without you being present. This is a great option for people who want to cut down on time and make their lives easier.

Ghost immobilisers, a new generation device connects to the CAN data network of your vehicle and utilizes buttons on the dashboard and the steering wheel to set a PIN number. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or light indicator. It can be placed anywhere on your vehicle without affecting the aesthetics.

This stealthy system is TASSA approved and can reduce your insurance costs. It also has an ability to track your vehicle that can track your vehicle even if it has been stolen. This is helpful if you have a rare or expensive vehicle that you have invested lots of time personalising.

The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your car remotely if you forgot your PIN or not able to access the vehicle due to a reason. This feature is great for when you have to take your kids to school or go on errands, but don't want to put yourself at risk by letting the safety of someone else driving your car. This feature is useful in the event that you need to bring your vehicle in for repair or service.

Another benefit of the Ghost is that it doesn't transmit or detect radio frequency signals, making it undetectable to thieves who employ RF scanning or code technology to capture codes. It also shields your vehicle from key duplicates, ECU swapping and other typical methods of theft.

No key to cloning

Ghost immobilisers are a fantastic option to protect high-end vehicles and are designed to stop key copying. They work by preventing your car from starting until an additional PIN code is entered in conjunction with the standard key fob. This makes it difficult for thieves to steal the vehicle, and may even deter them from attempting. This is a particularly good option if you've invested a lot of time and money personalising your vehicle or have a unique or expensive model.

These immobilisers connect to the vehicle's CAN data network and are completely hidden which means there is no indication of its presence in the vehicle. It is also impossible for a thief to detect the device by using radio frequency scanning or code grabbing technology. This means that a thief will need to invest much longer to get your vehicle.

To get around the system, a thief must be aware of the pin code and the location of the Ghost. However, the pin code is specific to you and can be altered as many times as you'd like. The pin code is simple to remember, but mathematically unattainable for someone else to understand. In addition the engineer will provide you with an emergency PIN code to override if you ever forget the pin.

The Ghost CAN Bus immobiliser could be easily installed anywhere on your vehicle. It is compatible with all vehicles and completely customizable to match the style of your car. It is also very easy to use and is affordable. The device can be moved to a different vehicle, if it is compatible with the new vehicle.

The immobiliser for the CAN bus is compatible with a variety of other security features. For example, it can detect the damage to your vehicle and warn the owner. It could also stop the engine if the car is tampered with. The system will protect your vehicle from hacking and key duplication. It can also detect any vibrations or contact with the vehicle. It can also notify the owner if the vehicle is moved.

No OBD port hacking

Ghost 2 immobiliser utilizes a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief getting into your vehicle to disable the alarm, disable your key fob, and code new keys. This technology is an improvement over the methods that were used by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected if you disconnect or change your battery.

The autowatch Ghost installer Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking, and copy-cat car theft. It does not utilize LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console and door panels.

Modern thieves use diagnostics to detect circuit cuts on your vehicle and can bypass immobilisers that require a large amount of wiring or are incorporated into the wiring. The Ghost is weatherproof, does not require additional wiring and cannot be detected by professional diagnostic tools. It can be even installed on vehicles equipped with anti-theft equipment.

Another benefit of the Ghost immobiliser is that your vehicle can only be started by a person who has access to the PIN number and has physical access to your vehicle. This is a big benefit over security systems that can be bypassed with simple cable tampering, a screwdriver or the utilisation of a universal remote controller.

If you forget your PIN, you can easily reset it with the emergency PIN override function on a mobile device or computer. This is useful if need to start your car after leaving it in a garage or using the help of a valet parking service.

The Autowatch Ghost 2 is the latest generation of the product and is affixed to insurance by TASSA when installed by one of our authorized installers. It features a QR fingerprint system to identify parts that are not in use, which allows for the return of stolen items if they are found. It can also be switched to'service mode' which permits the engine to be started when your car is in a garage, or if you have valet parking, but you will need to enter your PIN code again to exit the car.