How to Replace a UPVC Window Handle

Don't panic in the event that your upvc window handle is broken. Replacing the upvc handle on windows seal replacement is a straightforward job that can be completed in just a few easy steps.

It doesn't matter if you have an in-line or a cranked espagnolette window handle, they all have an elongated spindle that extends out of the back plate. This spindle is then placed into the locking device.

Identify the lock type and handle

Over time window handles or locks can get damaged and lose function. It is possible to fix this issue without replacing the entire uPVC unit. One of the first things you need to do is to determine the kind of lock and handle you have, as this will determine what parts will be required for replacement.

You can identify the kind of handle by looking at the base. There will be a screw or pin holding the handle to its base. If the screw is gone it could be an indication that the handle has split from the base. If the handle has split internally and isn't able to hold onto the spindle anymore, it may also be an indication that the handle must be replaced.

There are many uPVC handles that are available, but the Espag handle is the most popular. They are usually secured with two bolts and the spindle works with the locking mechanism of the window frame. These handles are usually used on tilt and turn uPVC windows.

Another kind of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, but they have a lower projection from the frame. These handles are usually used on older uPVC window frames.

Venetian window handles are another option. They are similar to Espag handles, but have an elongated bottom that lets them to be installed flush with the frame. They are a great option for homeowners looking for an elegant, stylish handle that will blend in with their uPVC window frames. The handles are also available in a large selection of colors to fit any decor.

Take a measurement of the spindle

It is crucial to know how the handle is installed before you can order the replacement. This will tell you if it's too tight or loose, and also if it can fit into the window frame. It is done by identifying what kind of handle you own and determining the spindle length. The spindle is the metal shaft that connects the handle to the lock in the window frame. The spindle is available in various sizes. The current standard for the industry is 8mm. Older handles might have a cross-section of 9mm so you'll need to measure your old handle to ensure you get the correct size replacement.

There are many kinds of window handles, but the most common are inline Espagnolette and Cockspur handles. These handles operate with a locking mechanism inside the window, using shootbolt rods that secure the window when it is closed. Depending on the type of handle they are held in place using screws or pins.

You can buy replacement upvc handles online or in most DIY stores. They come in a range of finishes and are suitable for new and replacement windows. To ensure security they can be key-locking or non-locking fire-escape.

To remove the old handle just open the window towards the door and unscrew all screws that hold it in place. Place the screws in a container to prevent damage. After the screws have been removed, gently pull out the handle and measure from the base to the top of the spindle. This will give you the information you need to buy the right replacement. The spindle of the handle is the shaft made of metal that connects it to the lock gearbox in the window frame.

Remove the old handle

Switching the handle of a uPVC handle is a straightforward task that takes less than five minutes if you have the appropriate tools. The first thing you need to do is determine the kind and size of the handle or lock. This will help you determine the best replacement. Then, you can measure the spindle to ensure that the handle is suitable. Finally, you'll need to take the handle off and replace it with the new one.

The majority of uPVC handles come with inline Espagnolette handles. These handles have a central spindle which slots into the locking mechanism on the window. They are usually simple to remove, but they may require force if they become stuck. There are usually two screws that keep the handle in place, which can be removed using the help of pliers or a screwdriver. You may also need to remove pins based on the type of handle.

Once the screws are removed, you can pull off the handle. When the handle is open and the top of the baseplate will be visible. It will reveal two more screws that can be removed. If the sticker remains visible, you'll have to remove it.

You can now screw into the new handle using the screws that came with the old handle. Align the screw holes on the window with the holes in the handle. After you've done this then replace the caps on the screws. Test the new handle. It's simple to replace a uPVC, but you have to do it correctly.

Fit the new handle

It's time to put in your new handle if it has been successfully removed the old one from the frame. Begin by locating and taking off the screw covers with your screwdriver. Once they are removed, put them in a safe location and move on to the next step.

Then screw the spindle in by aligning it with the existing hole. Make sure that the holes in the handle with those in the window frame. Make use of a screw that is the same size as the one used previously.

uPVC Espag handles are equipped with a 7mm square spindle that turns the lock mechanism that is installed to the window. This type of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) have an extended nose that locks over the frame's outer or transom bar cross member and are typically found in older windows made of uPVC.

After the new handle is installed, it is important to verify that it functions correctly by locking and unlocking the window a few times. If everything goes according the plan, the new uPVC handle should be securely fixed and operating smoothly. If not, the above steps will help you identify any problems and resolve it quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or any other home improvement that is glazed. Our glaziers are trained to repair or replace a variety of window screen replacement frames and handles which makes us a great choice for your double-glazing requirements.

Test the new handle

Over time, uPVC handles can be damaged and worn out. This can leave them less effective and secure which is why it's crucial to replace them as quickly as possible. This is also a great idea to do when you are upgrading your windows. Switching the handle and locking mechanism will ensure the integrity of your new windows.

When it is about uPVC window handles, there are a number of different styles. Some are fixed by pins or screws, whereas others have blades that slot into the lock mechanism. Each type has its own method of replacement, therefore it's important to know what type you have before working on it.

Espag window handles are the most well-known type, and they're typically found on the latest uPVC windows replacement near me. The spindle extends from the handle to the lock gearbox and triggers the locking mechanism when you open the window. They're also simple to remove however you should take care not to damage the mechanism or the handle while taking them off.

Cockspur window handles are a popular option for uPVC windows. They're held by a spur that hooks onto an elongated striker plate that is attached to the frame, and when you shut or tilt the window, it activates the locking mechanism. This kind of handle can be more difficult to repair than others, but is an excellent choice for homes with a lot of windows.

Venetian window handles are secured by two bolts and have an elongated projection from the frame, in contrast to the Espag handle. These handles are great if your goal is to have a flush handle which blends in with uPVC window frames. These are great for both commercial and residential properties.