Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. However If windows with double panes are anchored by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this case you'll need source some plastic spacers that will help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will prevent water and drafts from entering your home until a professional arrives to repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap between the window and the door is substantial, you may need to consider security screens that has a window repair near me. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close your window and do an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Based on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze, it may be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's easy to change the hinges on a window, but it's easier if someone else helps hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or by improper installation in the factory. Sending us photos via our website will often solve the issue. We are happy to give assistance.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become misaligned due to wear, causing a gap where the sash and frame meet. If they are damaged beyond repair, it could be necessary to get them re-aligned. The interlock may be disaligned. It is located on the hinge's side, and could require to be cleaned. In certain instances it is possible to replace the hinges.

The next common reason for draughts is window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert immediately.